예방보전, 예지보전, QC(preventative, predictive maintenance and quality control)가 실행되는 산업분야는 모두 적용이 가능한 산업입니다. 또한 아래와 같은 분야도 가장 많이 활용되며 큰 효과를 보고 있는 산업분야라 할 수 있습니다.

Automotive and transportation (자동차산업, 물류산업)

Wind noise(바람에 의한 소음), water leaks (누수,방수; windshield, tightness), bearings (로봇 베어링;including bearings on robots). Leaks on air brake systems(공기브레이크시스템의 누설).

Aviation and space (항공,우주산업)

Cabin pressure leaks, cockpit windows, oxygen system leaks, fuel cells, actuators, tire retention, hydraulic valves(유압밸브), hot air duct leaks, slides and rafts, nitrogen system and pneumatic system leaks(질소 및 뉴메틱시스템 누설, bearings.

Trucks and buses (트럭, 버스)

Wind noise, water leaks, air brakes, injector sequence(분사제어장치), wheel bearings (slow speed).

Rubber and tire (고무 및 타이어)

Leak detection; steam traps, valves, bearing monitoring, electrical gear (tracking), pumps, motors.

Railroads (철도)

Air brakes, bearings, water leaks, electrical gear, and diesel injector's sequence.

Chemical and petrochemical (화학, 정유석유화학)

Pressure/vacuum leaks(압력/진공 누설), bearing monitoring(베어링 상태감시), steam traps(스팀트랩), valves, compressors, heat exchangers(열교환기), gear/gear boxes, pumps (공동현상;including cavitation), motors, electrical gear (arcing).

Construction/Contracting vehicles & cranes (건설. 건설기계 및 크레인)

Pump cavitations; valve leaks, air in-leakage around fittings, tire retention, bearings, gears.

General manufacturing (일반제조)

Bearings, valves, steam traps, compressors, heat exchangers, pneumatic systems, pressure/vacuum leaks, gear/gear boxes, electric arc/corona/tracking in electrical gear.

Gas plants (가스플랜트산업)

Compressor valve analysis(압축기 밸브분석), leak detection(누설감지), valves, bearing monitoring.

Facilities and buildings (시설, 빌딩시설)

Bearings, air handlers(공기조작기), pumps, motors, compressors, pressure leaks, steam traps, valve, chillers(냉각기), transformers(변압기), circuit breakers, relays, leaks in building envelope i.e. air infiltration(냉동공조,공기순환), water leaks(누수).

Marine (조선)

Water tightness integrity tests(탱크누수), hatches(해치커버), bulkheads, pneumatic system leaks, valves, heat exchangers(열교환기), steam traps, diesel injector timing(디젤연료분사), condensers, bearing monitoring, refrigeration leaks(냉각누설), pumps, compressors, electrical gear (arcing), air distribution boxes (Manifold).

Materials and composites (재료 및 주조)

Vacuum, autoclaves, bearings on pumps.

Pulp and paper (펄프 및 제지산업)

Steam traps, valves, bearing monitoring (저속베어링상태감시;including slow speed), heat exchangers, pressure/vacuum leaks, and electrical gear.

Power plants (전력산업) (발전기,변전기;generation/distribution)

Condenser in-leakage(컨덴서 누전), heat exchangers, steam traps, valves, boilers, bearing monitoring, pumps, turbines(터빈), arcing and corona in electrical gear(코로나).

Textiles (섬유산업)

Bearings, valves, pressure/vacuum leaks, steam traps.

Food processing (식품)

Steam traps, valves, heat exchangers, bearings, pumps, motors, pressure/vacuum leaks, electrical gear, air distribution boxes (Manifold).

Water waste treatment (상하수도)

Bearings, valves, pressure leaks, gearboxes.